Forging process is the basis of the integrated system.
Kawada has the axial type hot forging press and cross type high-speed automatic hot forging press(AMP).
In the axial type hot forging press, are forged parts of the wheels mainly as wheel hub, joint yoke among others and in the cross type high-speed automatic hot forging press(AMP) are mainly forged small parts such as mission gear, nuts for construction among others.
We also have the machine of sandblasted, thermal treatment of normalized, tempering heat treatment, paint electrode position cationic, with which we improve the quality products after forging.
01Hot forging press
We work respecting the quality of all the processes, to press, heating and cutting metal.
In the axial type hot forging press, heats up to 1200 degrees cut steel material, it is molded between closed with 3 processes, mainly, press, roughing and finishing and trimming burr of the around going giving the finish of the piece.
In Kawada, we put in perspective the efficiency of processing department of the following processes of our company, considering the space and inclinations to be able remove the piece, 4pieces are manufactured in 1 minute, 3 hand machines press1600t and 3 machines press 2500 t.
02Closed forging press machine
Precision without errors by automatic line
The axial type hot forging press automatic, heats up to 1200 degrees cut steel material, molded in closed with 4 processes mainly, press, drilling, roughing and finishing and trimming burr of the around going giving the finish of the piece.
Kawada, considering the space and inclinations to be able remove the piece,4 pieces are manufactured in 1 minute.
Considering the consumption of forging mold, carrying out verification of status of the mold to be able to extend the life of the mold, adjusting the state and change, we change the conditions going giving the finish of the piece.
03High-speed automatic hot forging machine (AMP)
To achieve high performance and low cost, we have a few machines AMP
Kawada has 3 high speed hot forging press machines cross-type (AMP: Automatic Multistage Press).
It is a machine automated created by Hatebur company, which cuts, swages, molding and piercing up to the heated bar, which in Japan alone there are 20 forging machines adopted.
AMP shows its efficiency in works of side hits and performs to high speed forging of round parts such as gear mission and others.
|Press||High-speed automatic hot forging machine AMP50||2|
|High-speed automatic hot forging machine AMP70||1|
|Auto press with transfer 2500T||1|
|Manual press 2500T||3|
|Manual press 1600T||3|
|Small press 150~200T||6|
|Extra model device||Forging Roll||2|
|Heat treatment||Heat Treatment Furnace Systems||1|
|Surface treatment||Shot Blast||4|
|Electrodeposition coating||Cationic electrodeposition coating||1|